How to Change a Cub Cadet Walk Behind Lawn Mower Blade

How to Change a Cub Cadet Walk Behind Lawn Mower Blade

Sharpening or changing your lawn mower blade is imperative to a well-manicured lawn. A lawn mower with a dull blade will cut the grass unevenly and the tips of grass blades will be torn instead of cleanly-sliced. Periodically inspect your lawn and lawn mower to determine if a new blade is needed. As a rule of thumb, sharpen or replace your lawn mower blade at least once a year. Refer to this guide when it’s time to change your .

Before performing any maintenance on your lawn mower, refer to your owner’s manual for maintenance instructions and safety information. Maintenance instructions vary by model, so depending on your lawn mower model our instructions may vary slightly.

Before changing the wheels on your lawn mower, please abide by these safety precautions:

  • Shut off the engine
  • Allow the engine to become cool to the touch
  • Disconnect the spark plug wire to prevent accidental starting

First, turn the mower on its side to access the blade. Make sure the air filter and carburetor side is facing up. Mower blades are sharp so make sure you always wear gloves for protection. Secure the lawn mower blade using a blade removal tool or place a block of wood between the blade and the frame of the mower to support the blade when you apply pressure to remove it.

Remove the blade retaining bolt and then remove the blade. Depending on wear and tear, either sharpen the blade or replace it with a new one. Secure the new or sharpened blade with the blade removal tool or block of wood. Then tighten the blade retaining bolt to the torque indicated in your owner’s manual.

The side of the blade that says “Bottom,” or shows the part number should face the ground when the mower is in operating position. Once the blade is secured on your lawn mower, turn the lawn mower right side up and reconnect the spark plug. Start your lawn mower and listen for noises or vibration.

Free Parts Search - How to Change a Cub Cadet Walk Behind Lawn Mower Blade     Free Shipping - How to Change a Cub Cadet Walk Behind Lawn Mower Blade

How to Sharpen Your Walk Behind Lawn Mower Blade

How to Sharpen Your Walk Behind Lawn Mower Blade

Your Cub Cadet walk behind lawn mower is useless with a sharp cutting blade.  The only way to achieve a quality cut and healthy lawn is to regularly replace or sharpen the blade on your lawn mower. To determine if it’s time for a blade sharpening or replacement, periodically inspect your lawn and lawn mower. If you see unevenness in your lawn or notice the tip of grass blades are torn and not cleanly-sliced, it’s time to sharpen or replace your lawn mower blade. Additionally, if your Cub Cadet lawn mower blade has dings, nicks or rust, then it is time to upgrade your blade.

Here’s how to sharpen the blade on your Cub Cadet walk behind lawn mower.

Before performing any maintenance on your lawn mower, refer to your owner’s manual for maintenance instructions and safety information.

First, disconnect the spark plug wire from the spark plug to prevent accidental starting. Then turn the mower on its side to remove the lawn mower blade – make sure the air filter and carburetor side is facing up.

Place a block of wood between the blade and the frame of the mower to support the blade as you apply force to remove it. Remove the hex bolt and the blade bell support holding the blade and blade adapter to the engine crankshaft. Take the blade and adapter off the crankshaft. Remember, cutting blades are sharp so always wear heavy duty gloves when working with them.

Sharpen the blade with a mower blade sharpener, file, or on a grinding wheel. Do not try to sharpen the blade while it is still on your mower.

Secure the blade in a vice when sharpening with a file or hand-held grinder. When you sharpen the blade, follow the original angle and grind. To keep the blade balanced, grind each cutting edge equally. To test the blade balance, remove the blade and balance it on a round shaft screwdriver. Shave metal from the heavy side until the blade balances evenly.

Before placing the blade back on your lawn mower, lubricate the blade adapter and crankshaft. Lubricate the crankshaft and inner surface of the blade adapter with light oil and then slide the blade adapter onto the engine crankshaft.

Replace the blade adapter. The side of the blade marked “Bottom,” or with the part number, should face the ground when the mower is in operating position. Make sure the lawn mower blade is aligned and seated on the blade adapter flanges. Place the blade bell support on the .

Align the notches on the blade bell support with the holes in the blade. Replace and tighten the hex bolt by hand. Place the block of wood between the and the mowing deck housing again and tighten the hex bolt to the torque recommended in your owner’s manual.

Turn the lawn mower right side up and reconnect the spark plug. Start your lawn mower and listen for noises or vibration. Adjust the blade balance if necessary.

Free Parts Search - How to Sharpen Your Walk Behind Lawn Mower Blade    Free Shipping - How to Sharpen Your Walk Behind Lawn Mower Blade

High-Lift Blades and Mulching Blades

High Lift Blades and Mulching Blades

The most important function of your lawn mower is to cut your grass and the biggest factor in achieving a quality cut is your lawn mower blade. While all blades cut the grass, not all lawn mower blades are created equal. Different types of lawn mower blades function differently, and there are two styles of blades you should be aware of – high-lift blades and mulching blades.

High-lift blades

High-lift blades are also referred to as 2-in-1 blades. These blades aid in assist in cutting grass and discharging the grass clippings out from the deck to fall back onto your lawn. High-lift blades are designed to create higher-lifting airflow. These blades can be identified by a drastic upward angle on the back end of the blade, which helps to propel the clippings through the discharge chute to the back of the bag, reducing clogging.

Mulching blades

Mulching blades are also referred to as 3-in-1 blades. They cut the grass into extremely small particles, eliminating the need to frequently unload heavy bags or pick up clumps of grass clippings. This method of cutting has a positive effect on the health of your lawn. The mulching blades chop grass clippings into small particles that can become a natural fertilizer. That fertilizer replenishes the soil with nutrients that your grass has absorbed over the season.

Mulching blades are designed with a more curved style surface. They frequently include extra cutting surfaces along the blade edges and may also come in a “+” design. The “+” design is two individual blades arranged in a perpendicular manner to enhance mulching.  Usually older style mowers utilize this blade design.

Mulching blades are used with mulch kits. Mulch kits generally consist of mulching blades, a mulching plug which closes off the discharge opening to keep grass clippings contained under the deck for re-cutting, and any necessary hardware for installation.

There is a different lawn mower blade for different situations and each one serves a very specific purpose. There isn’t one lawn mower blade that can do it all as effectively as the lawn mower blade specifically designed for the method you wish to use.

High Lift Blades and Mulching Blades - free parts search   High Lift Blades and Mulching Blades - free shipping

How to Change the Deck Belt on a Cub Cadet Riding Lawn Mower

How to Change the Deck Belt on a Cub Cadet Riding Lawn Mower

Staying on top of maintenance and repairs will extend the life of your Cub Cadet riding lawn mower and keep it operating like new. Small repairs, like changing the deck belt on your lawn mower, are imperative and aid in your mower’s ability to cut grass efficiently. Here’s how to change the deck belt on a Cub Cadet riding lawn mower.

Before performing any maintenance on your Cub Cadet lawn mower, refer to your operator’s manual. It lists required maintenance, safety information, and instructions for your machine. Maintenance instructions vary by model, so depending on your riding lawn mower model our instructions may vary slightly.

First, position your lawn mower for deck belt replacement by parking the mower on a flat, level surface. Turn off the engine, remove the ignition key, and disconnect the spark plug ignition wire to prevent accidental starting.

Raise the deck height to the highest position and place wooden blocks under each side of the mower deck. Lower the deck height to the lowest position, lowering the mower deck onto the blocks. Pull the J hooks from the left and right side to release the deck from the hangar brackets. Remove the wooden blocks from under the deck and pull the click pin out of the front deck hanger rod.

Remove the belt keeper rod and the deck belt from around the mower’s engine pulley. Raise the deck height to the highest position, this time turning the front wheels to the left. Slide the mower deck out from under the machine.

Remove the belt cover from the outer pulleys and unlock the idler spring. Remove the nut and bolt that secure the deck’s idler pulley with the belt keeper. Use a 3/8 drive ratchet in the square hole of the right idler bracket and separate the idler pulleys. Then remove the left pulley.

Replace the old mower deck belt with a new Cub Cadet deck belt.

Reassemble the mower deck. Attach the nut and bolt that secure the deck’s idler pulley with the belt keeper. Re-hook the idler spring and put the belt covers back on the outer pulleys. Slide the cutting deck back under the mower.

Route the deck belt around the engine pulley and secure the belt keeper rod. Insert the click pin into the front deck hanger rod and the J hooks into the hanger brackets.

Lastly, reconnect the spark plug ignition wire and start the mower.

The deck belt on your Cub Cadet riding lawn mower connects the crank shaft to the mower blades, which causes them to turn. Replace your mower belt if you notice cracks forming in the rubber. Replacing the mower belt before it breaks will help you avoid interruption during mower operation.

How to Change the Deck Belt on a Cub Cadet Riding Lawn Mower - free parts search   How to Change the Deck Belt on a Cub Cadet Riding Lawn Mower - free shipping

How to Level a Riding Lawn Mower Deck

How to Level a Riding Lawn Mower Deck

If you’ve ever noticed that your riding lawn mower is not cutting your grass evenly, there’s a chance the mower deck is not completely leveled. The mower’s blades are attached to the deck so if the lawn mower deck is uneven, the blades cutting the grass are uneven, giving your lawn an uneven cut. Follow our experts’ instructions to level your riding lawn mower deck in no time.

Before starting the job, park your riding lawn mower on a hard, flat surface, shut the engine off, and set the parking brake. If the parking brake is not on, your machine can roll back, injuring you or others.  Lastly, remove the ignition key to prevent accidental starting.

Note: wear heavy leather gloves when working with or near mower blades.

Cub Cadet Zero Turn Mowers

To adjust the lawn mower deck from front to rear, place the deck lift lever in one of the middle height positions.  Rotate the blade closest to the discharge chute, making it parallel to the lawn mower.

From there, measure the distance from the front of the blade tip to the ground, and then measure the distance from the rear of the blade tip to the ground.

Loosen the hex lock nut on the end of the front deck hanger rod, and raise or lower the front of the mower deck if necessary. If there is an additional jam nut keeping the lock nut in place, loosen that nut prior to adjusting the lawn mower deck and retighten it after you make the adjustment.

To adjust the lawn mower deck from side to side, rotate the blade closest to the discharge chute, making it perpendicular to the lawn mower. Measure the distance from the right side of the right-hand blade tip to the ground, then measure the distance from the left side of the left-hand blade tip to the ground.

Loosen the hex bolt that secures the adjustment gear on the left deck hanger bracket. From there, raise or lower the left side of the deck by turning the adjustment gear.

Your riding lawn mower deck is properly leveled when both blade tip measurements taken earlier are equal.

Retighten the hex bolt once the proper mower deck adjustment is complete.

Cub Cadet Tractors

To adjust your Cub Cadet Tractor deck from front to rear, place the deck lift lever in one of the middle height positions.  Rotate the blade closest to the discharge chute, making it parallel to the lawn mower. From there, measure the distance from the front of the blade tip to the ground, and then measure the distance from the rear of the blade tip to the ground.

Loosen the hex lock nut on the end of the front deck hanger rod to raise or lower the front of the lawn mower deck. If there is an additional jam nut holding the lock nut in place, loosen the jam nut before adjusting the deck and retighten it after you make the adjustment.

To adjust your Cub Cadet Tractor deck from side to side, rotate the blade closest to the discharge chute, making it perpendicular to the lawn mower. Then measure the distance from the right side of the right-hand blade tip to the ground, and the distance from the left side of the left-hand blade tip to the ground.

Loosen the jam that secures the adjustment nut on the rod under the rear fenders inside of each wheel. Raise or lower the sides of the tractor deck by turning the adjustment nuts. The deck is leveled when the blade tip measurements taken earlier are equal.

Retighten the jam nuts once the proper lawn mower deck adjustment is complete.

A level riding lawn mower deck is essential for a quality cut. When mowing, always be mindful of hitting things in your yard like rocks or pipes. These hard objects can cause a lopsided mower deck, altering the way the blades cut. With a level riding lawn mower deck you’ll notice a more even cut of your lawn each time you cut the grass.

 

How to Level a Riding Lawn Mower Deck - free parts search   How to Level a Riding Lawn Mower Deck - free shipping

Cub Cadet Seasonal Lawn Care Tips

Cub Cadet Seasonal Lawn Care Tips

Lawn care is a never-ending job. For many of us, sunshine and warm temperatures indicate that it’s time to make our lawns healthy and beautiful. However, you should take care of your lawn throughout each season, even if ice is thawing and leaves are falling. Whether or not you live in an area that experiences all four seasons, these lawn care tips will help keep your lawn looking its best whether it’s spring, summer, fall, or winter.

Lawn Care Tips for Spring

In the spring, there is a list of obvious maintenance to perform on your lawn from watering the grass to fertilizing to mowing. There are also a lot of not-so-obvious things to handle once the winter snow melts. For starters, remove leaves, sticks, twigs, and any other debris that accumulated during the winter. If your lawn suffered damage from cold temps, snow, ice, snow blowing or shoveling, you should replace the divots and place down new seed.

Many people know the importance of applying fertilizer to your lawn. In spring, applying herbicides to grass is beneficial as well. However, don’t apply both fertilizer and herbicide at the same time because herbicides will restrict grass growth.

Lastly, spring is the best time to get your equipment ready to work. Make sure your lawn mower and other equipment has had basic maintenance and is working properly. If not, you will still have time to perform repairs or buy new parts before too much grass has grown.

Lawn Care Tips for Summer

During the summer you should focus on mowing your lawn and watering it. With the high temperatures that summer brings, the best way to keep your lawn healthy and beautiful is to keep the grass a little long. Do not cut your grass to less than two inches in height because when grass is cut too short it is more likely to dry out and become damaged since the mower’s blades can’t shade the soil and roots from the sun.

If you’re using a sprinkler to water your grass, make sure you move it every half hour to ensure even watering. When watering during the summer, it’s best to do so early in the morning or in the evening. When the temperature is cooler, this prevents searing or scorching your grass when the sun is at its hottest.

Lawn Care Tips for Fall

To prepare for the fall and winter, fertilize your lawn one more time. Applying nutrients before the cold months will keep your lawn healthy and recuperate quicker in the spring. During the fall, it’s fine to mow your grass shorter than normal. This shorter grass won’t get as damaged by snow during winter. Fall is also a great time to put down new grass seeds in any dead areas.

Lawn Care Tips for Winter

During the winter, you’ll want to prevent damage and breakage to your grass, trees, plants, and shrubs. To do this, shovel your walkways to keep visitors off your lawn, which keeps the grass blades from flattening or breaking. Removing snow from shrubs and tree branches will also prevent breakage.

Winter is also a good time to trim branches, if needed. When tree limbs are dormant, the plant sustains less damage than when in full bloom.

Your yard will look its best if you utilize these seasonal lawn care tips. Well-maintained outdoor power equipment and parts are also essential to a great looking lawn. Just like your lawn, inspect your lawn mower and other equipment on a regular basis to make sure it’s ready to work when you need it.

Cub Cadet Seasonal Lawn Care Tips - free parts search   Cub Cadet Seasonal Lawn Care Tips - free shipping

Cub Cadet Single-Stage and Double-Stage Snow throwers

Cub Cadet’s snow throwers  come in single-stage 200 and two-stage 500, 700, and 900.  The single-stage snow thrower is best for walkways and driveways, while the two-stage snow throwers are recommended for larger spaces.  However, both of Cub Cadet’s snow throwers feature the following:

  • zero-turn posi-steer power steering
  • fingertip steering controls for precise turning
  • no rust
  • single-hand operation for chute
  • high-impact, clog-resistant chute

The Cub Cadet two-stage 500, 700, and 900 snow throwers also include the following:

  • more durable for use in extreme conditions
  • cast-iron engine construction
  • scratch-resistent cool blue skid shoes

Welcome to CubCadet-Parts-Direct.com

CubCadet-Parts-Direct.com is powered by Weingartz — Everything From Lawn to Snow. Weingartz is a family-owned and operated outdoor power equipment dealership with five locations in Michigan. We have been in business since 1945 and have been recognized as leaders in the power equipment industry for decades. We are a full-service dealer of the brands we sell with world-class after sale support in parts and service. We have extended our offering to include e-commerce parts, leveraging our expertise in the parts industry and our in-stock parts inventory of over $3 million to create the most comprehensive e-commerce power equipment parts site on the internet.

Our inventory of power equipment parts is probably the widest in the industry which allows us to offer quick response times and to give ‘real’ pictures of thousands of parts to make your selection as confident as possible. We stock parts from many top brands including: John Deere Parts, Toro Parts, Honda Parts, Cub Cadet Parts, MTD Parts, Exmark Parts, Stihl Parts, Echo Parts, Shindaiwa Parts, Tecumseh Parts, and RedMax Parts as well as engine parts from Briggs and Stratton, Kohler and Kawasaki.

We hope that you find the site useful and our customer service friendly and responsive. If there is anything that we can do to enhance your experience, please Contact Us and let us know. We appreciate any feedback and use it to continuously improve our site.

Thank you for your business!

Sincerely,

Dan Weingartz
President