How to Install a Mulch Kit on a Cub Cadet Tractor

How to Install a Mulch Kit on a Cub Cadet Tractor

A mulch kit is a way to convert your Cub Cadet tractor into a mulcher. When you change the tractor’s standard blades to mulching blades, the mulch kit recycles the lawn clippings as you mow and spreads them back onto your lawn. This returns nutrients back into the soil, keeping your grass healthy. Here’s how to install a mulch kit on your Cub Cadet tractor.

Depending on your model number, these instructions may vary.  Be sure to refer to your owner’s manual for detailed instructions, recommended maintenance and safety instructions.

Before performing any maintenance on your machine, engage the parking brake on a flat, level surface and remove the key from the ignition. Disconnect the spark plug wire to prevent accidental starting.

To install a mulch kit on a Cub Cadet tractor, begin by removing the mower deck. Set the deck height to its lowest setting. Pull the right idler pulley to release tension on the deck belt, and then ease the deck belt off the engine pulley.

Use pliers to remove the cotter pin from the front deck lift rod and slide the rod out of the hanger bracket. Remove the hairpin clip securing the right side of the deck to the hanger bracket supporting the cutting deck and release it from the hanger bracket by moving the deck outward and off the hanger rod making sure the deck doesn’t fall. Repeat this step on the left side and slide the deck out from underneath the tractor.

Once the mower deck is off, flip it over to access its underside to prepare to remove the old mower blades. Note: always wear heavy duty gloves when handling blades.

Use a block of wood and wedge it between the blade and the frame of the mower deck. Make sure it’s good and steady because you’ll be applying force. Remove the center holding nut from the mower blade with a wrench. Use a gloved hand to keep the blade from turning while removing the nut. Save the nut for installing the mulching blade. Repeat this blade removal step for the mower blade on the other side of the deck.

Once the old blades are removed, you can replace them with the new blades included in the mulch kit. Place the center hole of the mulching blade over the mounting stud on the underside of the mower deck. Make sure each blade with the side marked “bottom” or with the part number on it is facing the ground when the mower is in the operating position.

Use your gloved hand to hold the blade in place while tightening the holding nut with your wrench. Repeat this step to install the mulching blade on the other side of the deck as well.

To install the mulch plug on your Cub Cadet tractor, lift the discharge chute up. Place the mulch plug into the deck discharge chute by fitting the bolt on the rear side of the mulch plug into the hole in the deck.  Move the mulch plug into place, then pull and stretch the retaining plug on the mulch plug over the deck wheel bracket and hook it under the bottom of the bracket.

Slide the deck back under the tractor and reattach the deck. You are now ready to use your Cub Cadet tractor as a mulcher.

Free Parts Search - How to Change a Cub Cadet Walk Behind Lawn Mower Blade     Free Shipping - How to Change a Cub Cadet Walk Behind Lawn Mower Blade

How to Change the Deck Belt on a Cub Cadet Riding Lawn Mower

How to Change the Deck Belt on a Cub Cadet Riding Lawn Mower

Staying on top of maintenance and repairs will extend the life of your Cub Cadet riding lawn mower and keep it operating like new. Small repairs, like changing the deck belt on your lawn mower, are imperative and aid in your mower’s ability to cut grass efficiently. Here’s how to change the deck belt on a Cub Cadet riding lawn mower.

Before performing any maintenance on your Cub Cadet lawn mower, refer to your operator’s manual. It lists required maintenance, safety information, and instructions for your machine. Maintenance instructions vary by model, so depending on your riding lawn mower model our instructions may vary slightly.

First, position your lawn mower for deck belt replacement by parking the mower on a flat, level surface. Turn off the engine, remove the ignition key, and disconnect the spark plug ignition wire to prevent accidental starting.

Raise the deck height to the highest position and place wooden blocks under each side of the mower deck. Lower the deck height to the lowest position, lowering the mower deck onto the blocks. Pull the J hooks from the left and right side to release the deck from the hangar brackets. Remove the wooden blocks from under the deck and pull the click pin out of the front deck hanger rod.

Remove the belt keeper rod and the deck belt from around the mower’s engine pulley. Raise the deck height to the highest position, this time turning the front wheels to the left. Slide the mower deck out from under the machine.

Remove the belt cover from the outer pulleys and unlock the idler spring. Remove the nut and bolt that secure the deck’s idler pulley with the belt keeper. Use a 3/8 drive ratchet in the square hole of the right idler bracket and separate the idler pulleys. Then remove the left pulley.

Replace the old mower deck belt with a new Cub Cadet deck belt.

Reassemble the mower deck. Attach the nut and bolt that secure the deck’s idler pulley with the belt keeper. Re-hook the idler spring and put the belt covers back on the outer pulleys. Slide the cutting deck back under the mower.

Route the deck belt around the engine pulley and secure the belt keeper rod. Insert the click pin into the front deck hanger rod and the J hooks into the hanger brackets.

Lastly, reconnect the spark plug ignition wire and start the mower.

The deck belt on your Cub Cadet riding lawn mower connects the crank shaft to the mower blades, which causes them to turn. Replace your mower belt if you notice cracks forming in the rubber. Replacing the mower belt before it breaks will help you avoid interruption during mower operation.

How to Change the Deck Belt on a Cub Cadet Riding Lawn Mower - free parts search   How to Change the Deck Belt on a Cub Cadet Riding Lawn Mower - free shipping